IS 2002 Grade 1 & 2 Plates: India's Standard for Boiler & Pressure Vessel Steel
For thermal power projects, refineries, and industrial boiler manufacturing within India, IS 2002 is the governing national standard for pressure vessel and boiler steel plates. This guide breaks down its grades, properties, and certification requirements for Indian fabricators.
What is IS 2002?
IS 2002 is the premier Indian Standard specification for steel plates used in boiler and pressure vessel fabrication, issued by the Bureau of Indian Standards. It is widely recognised and mandated across domestic thermal power projects, refineries, and industrial boiler manufacturing, where compliance with BIS requirements is often a contractual and regulatory necessity.
Grade 1 vs Grade 2: Key Differences
IS 2002 is available primarily in Grade 1 and Grade 2. Grade 1 offers a minimum yield strength of 235 MPa and tensile strength of 360–520 MPa with 22% elongation, making it more ductile and suited to moderate-pressure applications. Grade 2 steps up to a minimum yield strength of 265 MPa and tensile strength of 410–560 MPa with 21% elongation, making it the choice for higher-pressure vessel designs.
IBR Certification for Indian Boiler Applications
For boiler applications within India, plates must often carry Indian Boiler Regulations (IBR) certification, specifically IBR Form IV. Convergence Steel supplies IS 2002 plates with IBR certification on request, ensuring compliance for thermal power plant and industrial boiler projects where this documentation is a statutory requirement for commissioning.
IS 2002 vs ASTM A516: How They Compare
While IS 2002 and ASTM A516 serve similar purposes in pressure vessel fabrication, they are not directly interchangeable. IS 2002 Grade 1 is roughly comparable to ASTM A516 Grade 55/60, while Grade 2 aligns closer to Grade 65/70 — but exact chemical composition and mechanical property limits differ between the two standards, so engineering approval is needed before substituting one for the other.
Sourcing IS 2002 Plates in India
Convergence Steel supplies IS 2002 plates directly from major Indian steel mills, in thicknesses from 6mm up to 100mm, ensuring full compliance with BIS requirements. Every plate is accompanied by a Mill Test Certificate confirming chemical and mechanical properties, giving procurement teams confidence for critical boiler and pressure vessel projects.
Conclusion
IS 2002 remains the definitive national standard for boiler and pressure vessel plates in India, and getting the grade and certification right is essential for regulatory compliance and vessel safety. Convergence Steel stocks IS 2002 Grade 1 and Grade 2 with IBR certification available on request.
Get a Free Consultation